€199,65€165,00 Incl. VATExcl. VAT
SKU: 800274-105
Z-Select 2000T 102x25mm
Are you looking for a wide label for a clear barcode or product code, but don't need much height?
The Zebra Z-Select 2000T 102x25 mm gives you over 10 cm of width on a compact label that is just 25 mm high. This leaves plenty of space for a long barcode, item number, or short line of text without using an unnecessarily large surface area.
This makes this version practical for:
Each desktop roll contains: 2,580 labels
You receive 12 rolls per box. This means one full package contains: 30,960 labels
Due to the limited height of 25 mm, many labels fit on a single roll. This is useful when you print large numbers of barcodes or identification labels daily.
The Zebra Z-Select 2000T 102x25 mm has:
This is a roll size for Zebra thermal transfer desktop printers. With 2,580 labels per roll, you can keep printing for a long time before the roll needs to be replaced.
The Zebra Z-Select 2000T is printed using thermal transfer technology. With this printing method, the image is applied to the label via a ribbon. Therefore, for this version, you do need a thermal transfer ribbon.
For the Z-Select 2000T, Zebra recommends, among others, ribbons from the:
Which ribbon is the best fit depends on the desired wear resistance and your printer. Are you unsure which ribbon you need? Let us know your printer model, and we will check for you.
Z-Select 2000T is made of smooth, white, and topcoated thermal transfer paper. The protective coating ensures a sharper print than simple uncoated paper. This makes this line suitable for cases where small text, barcodes, or graphic elements must remain legible.
The coating also helps with resistance to, among other things:
This makes Z-Select 2000T a step above standard uncoated paper quality when print quality is important.
The labels are provided with a permanent acrylic adhesive. This adhesive is intended for applications where the label must remain firmly in place on many common surfaces after application.
This makes these labels suitable for use on, for example:
The permanent adhesive is especially practical for product, warehouse, and logistics applications where the label is not intended to be easily removed later.
Are you dealing with an unusual, rough, or difficult surface? Then we advise you to check beforehand whether the adhesive is suitable for your application.
This version has perforation between the labels. This allows you to easily tear off a printed label, including the backing, from the rest of the roll.
This is useful, for example, when:
The labels are individually die-cut and detected by the printer via the gap between the labels.
Due to the 25.4 mm core and 127 mm outer diameter, this is a desktop version.
This SKU is used with thermal transfer printers such as:
Are you using a different printer? Provide us with the exact model, and we will be happy to check whether this roll and the correct ribbon fit your printer.
You will receive 12 original Zebra Z-Select 2000T label rolls.
Each roll contains:
In total, you receive: 30,960 labels
This size is especially suitable when you need a lot of width, but the information fits on one or a few short lines.
You can, for example, combine:
This makes 102x25 mm practical for products, boxes, and warehouse applications where a wide but low label fits better than a large square label.
We believe that a good partnership goes beyond just an order.
Do you have a question or are you unsure which labels are best for you?
Call us or start a chat via the website.
We specialize in labels and tagging and are happy to help you think through the right size, material, and adhesive. That way, we ensure you can get started quickly.
Print. Apply. Ready.
With a partner that thinks along with you.
This product has no reviews yet
